Does the films protect against Coronavirus?
Yes, it protects against Coronavirus. 95% of viruses will is eliminated within 15 minutes of putting the film onto the surface and 99,9% of viruses will be eliminated after one hour. With the PURZON060. And 96% after one hour with the COVERSAFE. For how long does the film protect against Coronavirus?
It protects against Coronavirus up to three years after it has been installed. It does not protect effectively against Coronavirus after that.
Does the films protect against COVID-19?
Yes, it protects against SARS-CoV-2.
The first test shows that the effect is >76% after only one hour of contact time with PURZON060 installed. And 98% with the COVERSAFE
Does the film impair the touch-function?
The touch-function should not be noticeably affected but a different application can give different results. The fingerprint generator that uses for identifications may be slightly affected.
Is there evidence that the products works?
The PURZON060 has been clinically tested in Europe. There is a patent that proves the reliability of the product. The products has been tested according to ISO22196 och ISO21702. The tests were conducted by independent test institutes.
Can other chemicals be used to clean the films?
Yes, other chemicals can be used to clean the films. Cleaning it does not change its effect against Coronavirus and bactria. But we do not recommend to use strong chemicals on the surface for long time. It can impact the plastic in the film.
Can the film’s surface induce allergic reactions to the skin?
No, neither the nanoparticles nor the silver ions in the film affect the skin and cannot induce an allergic reaction.
How shall the film be stored?
The film shall be stored away from direct sunlight or heat. The reason being the glue can dry out and the plastic will crackle, which will make it lose the antibacterial effect. It should not be stored in too cold environments; thus it makes the plastic difficult to work with.
Is it possible to apply the film incorrectly?
The function of the film is not affected by how it is applied.
Is it possible to re-apply the film after doing it incorrectly?
4PROTECT -GEN2 film
Yes, with this film is possible to remove the film during the installation.
Because if we add the GEN2 material it makes it easier to install.
PURZON060 -standard & COVERSAFE
It is not possible to re-apply the film unless the application liquid has been used.
The film itself is thin and flexible which makes it hard to move once it is in place. We, therefore, recommend using application liquid to make it possible to move the film as long as it is liquid underneath it.
Is it possible to move and reuse the film once it has been applied?
No, it is not possible to move and reuse the film once it has been applied.
Can the film be applied without application liquid?
Yes, it can be applied without application liquid (dry-application). The liquid is a gel which minimises air bubbles andmakes the application of the film easier. This is especially useful when applying the film on bigger screens.
We recommend you to use the new GEN2 film as a bottom layer for easier installations.
Will the film or the effectiveness of the protection be affected by where the environment is placed e.g. by a window causing direct sunlight on to the screen?
The sunlight does not affect the function of the film. It can however shrink slightly since it is made out of plastic.
Does the surface need to be cleaned once the film is applied?
Regular cleaning routines were part of the tests that were conducted, and we do therefore recommend to clean it regularly even though the film itself actively protects against viruses.